{"id":3532,"date":"2026-10-09T04:05:58","date_gmt":"2026-10-08T20:05:58","guid":{"rendered":"http:\/\/www.thebiggchat.com\/blog\/?p=3532"},"modified":"2026-10-09T04:05:58","modified_gmt":"2026-10-08T20:05:58","slug":"how-to-use-a-honing-steel-correctly-42a1-673668","status":"publish","type":"post","link":"http:\/\/www.thebiggchat.com\/blog\/2026\/10\/09\/how-to-use-a-honing-steel-correctly-42a1-673668\/","title":{"rendered":"How to use a honing steel correctly?"},"content":{"rendered":"

Hey there, thanks for swinging by\u2014if you\u2019ve ever stared at that long, metal rod hanging next to your chef\u2019s knife (you know, the honing steel?) and wondered if it\u2019s actually just for show, you\u2019re not alone. For ages, I\u2019ve had home cooks and even some new line chefs hit me up at our shop going, \u201cWait, why do I need this when I have a knife sharpener?\u201d Or, worse, they\u2019ve used it wrong so many times they ended up with a wobbly edge that\u2019s more likely to skip through a tomato than slice it. As a knife supplier who\u2019s worked with both hobby cooks and professional kitchens for over a decade, I\u2019ve seen firsthand how a honing steel done right can make your knives last months longer between actual sharpening. Let\u2019s break this down\u2014no fancy jargon, just real, usable stuff that works. Knife<\/a><\/p>\n

<\/p>\n

First off, let\u2019s clear up the big myth: a honing steel doesn\u2019t sharpen your knife. Period. Sharpening is cutting away tiny bits of metal on a wheel to create a brand-new edge; honing is realigning those tiny, bent metal fibers (called \u201cburrs\u201d or \u201cedge fragments\u201d) that get misaligned after chopping, slicing, or even just wiping your knife on a towel. Think of your knife edge like a pile of pencils that got knocked over\u2014honong is just standing them back up straight again, so they cut clean instead of dragging or catching. Skip that step, and those bent fibers will fold over onto themselves every time you use the knife, making the edge dull way faster, even if you \u201csharpen\u201d it every week.<\/p>\n

Now, let\u2019s talk prep. You don\u2019t need anything fancy here, just the steel, your knife, and a flat, stable surface (a cutting board on the counter works\u2014no balancing this over the sink, I\u2019ve seen way too many knives take a swim). First, check your steel: is it actually in good shape? If it\u2019s a plain metal steel (not ceramic, but that\u2019s a different post), you should run your finger very<\/em> gently along the length of the steel (away from the tip!) to feel if there are any dents, scratches, or rough spots. If there are, toss it\u2014those will scratch your knife edge instead of aligning it. Also, make sure your knife is clean and dry: food gunk or water can get caught between the edge and the steel, and that\u2019s a fast track to nicking your knife.<\/p>\n

Next, the setup. Hold the steel vertically on your counter, and you can either grip the top with one hand to keep it steady (if you\u2019re right-handed, hold it in your left) or wrap a clean kitchen towel around the base to stop it from sliding. For most people, the \u201cgrip\u201d is natural, no need to overcomplicate it. Now, your knife: hold it in the other hand, at a 15 to 20-degree angle to the steel. Wait\u201415 to 20? That\u2019s not a random number. Your knife\u2019s edge has a specific angle (most chef\u2019s knives are around 18 degrees per side, but home cooks often use a little steeper, around 20, and that\u2019s fine). If you hold it too flat, you\u2019ll be grinding the side of the edge into the steel, which is bad. Too steep, and you won\u2019t hit the edge at all. A quick tip: if you can\u2019t nail the angle, just keep the edge of the knife (the sharp, thin part) touching the steel, and the flat side of the knife facing away from the steel. That usually lands you around the right angle\u2014no protractor required, I promise.<\/p>\n

Now, the actual honing motion. This is where most people mess up. Don\u2019t saw back and forth like you\u2019re cutting a log\u2014 that\u2019s not what you want. Instead, start at the top of the steel (close to your hand, not the sharp tip) and glide the knife down slowly, keeping that steady angle the whole time. When you get to the bottom of the steel, lift the knife straight off, and do it on the other side. Wait\u2014both sides? Yeah, because the edge has two sides (duh), and you need to align both. Do this 5 to 7 times per side. No more than that\u2014over-honing actually bends those fibers too much, so they snap instead of staying straight. I\u2019ve seen a line chef once hone a knife 20 times because he thought more was better, and he ended up having to send it off for professional sharpening a week later. Save the extra motions for the gym, not your knives.<\/p>\n

Pro tip here: if your steel is ribbed (the kind with tiny lines, not smooth), you can use those to help pull the bent edge fibers into line, but only if you keep that consistent angle. Smooth steels work too, you just have to keep the motion steady. And never, ever lean on the steel or push too hard\u2014your knife is the softer metal, so the weight of the knife is enough. If you\u2019re shoving the knife into the steel, you\u2019re going to damage the edge, not fix it.<\/p>\n

Wait, what about after you hone? Don\u2019t skip the wipe-down. When you honed, those bent fibers might have come loose, and they\u2019ll be sitting on the edge of your knife\u2014so run a clean paper towel or a damp cloth along the edge (away from your fingers, obvi) to get rid of any tiny metal bits. That also gives you a chance to check if the edge is straight: try slicing a piece of paper, or even a ripe tomato. If it glides through without dragging, you did it right. If it skips or pulls, you probably messed up the angle, or rushed the motion\u2014just reset and try again, it\u2019s no big deal.<\/p>\n

Now, how often should you do this? That\u2019s the question everyone asks. If you\u2019re cooking at home a few times a week, honing after every 3 to 4 uses is perfect. Line chefs might do it before every shift, because they\u2019re chopping 50 pounds of onions a day. If you only use your knife for a sandwich once a week, honing before you make it is fine. And remember: honing is not a replacement for sharpening. Even if you do it every time, you\u2019ll need to have your knives professionally sharpened (or do it yourself with a sharpening stone) every 2 to 6 months, depending on how much you use them. Over-honing long-term will cause that edge to wear out faster, so don\u2019t skip the sharpening, and don\u2019t hone so much that you\u2019re wearing the edge down.<\/p>\n

Let\u2019s talk common mistakes, because I see these all the time. First, using a honing steel on a dull knife. If your knife is so dull it can\u2019t cut through an apple, honing won\u2019t fix that\u2014you need to sharpen it first, then hone to keep the edge straight after. Second, honing with a dirty steel. If your steel has old knife gunk on it, that\u2019ll get on your knife, and maybe even scratch the edge. Wipe your steel down with warm, soapy water every few uses, and dry it off. Third, using the wrong steel. Ceramic steels are harder, so they work well for knives with harder edges (like Damascus or high-carbon steel), but metal steels are more forgiving for home cooks. Don\u2019t grab a steel that\u2019s way too big or way too small for your knife\u2014 a 10-inch chef\u2019s knife needs a steel around 9 to 12 inches, not a 4-inch paring knife steel for a big chef\u2019s knife.<\/p>\n

Here\u2019s a little story to drive this home: a few months back, a regular customer brought in his 10-year-old chef\u2019s knife that he swore \u201cwas ruined.\u201d He\u2019d been using a cheap honing steel he bought at a grocery store wrong for years, sawing back and forth every time he cooked, and the edge was all bent and worn. I showed him how to hold the steel, get the angle right, and do the slow glide, and then he came back a month later saying his knife cuts like new. Turns out he\u2019d been wasting money on new knives because he didn\u2019t know how to use the one he already had\u2014just because the tool was there, doesn\u2019t mean you know how to use it.<\/p>\n

For all you folks out there who run restaurants or buy knives for your kitchen staff: make sure your team knows how to use a honing steel correctly. I\u2019ve had more than one chef tell me that teaching their line to hone properly cut their knife replacement budget by almost half. It\u2019s a small step that makes a huge difference.<\/p>\n

If you\u2019re still confused, or you need a recommendation for a good honing steel that\u2019s not overpriced, hit us up. We work with all kinds of knives and steels, and we can point you to one that fits your knife, whether you\u2019re a home cook or a busy restaurant. No pushy sales stuff, just honest advice\u2014we\u2019ve been doing this for years, and we\u2019d rather you have a knife that works for you than sell you something you\u2019ll never use right.<\/p>\n

<\/p>\n

Now, quick recap so you don\u2019t forget: 1) Honing = realigning edges, not sharpening. 2) Steady 15-20 degree angle, no sawing. 3) 5-7 slow glides per side, don\u2019t overdo it. 4) Honing every 3-4 uses for home cooks, sharpen every few months. 5) Check your steel for damage before using.<\/p>\n

Caulking Gun<\/a> References:<\/p>\n